Titanium dioxide nanotubes addition to self-adhesive resin cement: Effect on physical and biological properties

DENTAL MATERIALS

Peaks at 1608 and 1638 cm−1 identified in the spectral bands used for calculating the degree of conversion before polymerization (0min) and after mixing base and catalyst pastes (3, 6, 9, 12 and 15min).

Titanium dioxide nanotubes addition to self-adhesive resin cement: Effect on physical and biological properties

Objectives. This study has investigated the influence of Titanium dioxide nanotubes (TiO2-nt) addition to self-adhesive resin cement on the degree of conversion, water sorption, and water solubility, mechanical and biological properties.

Methods. A commercially available auto-adhesive resin cement (RelyX U200(TM), 3M ESPE) was reinforced with varying amounts of nanotubes (0.3, 0.6, 0.9 wt%) and evaluated at different curing modes (self- and dual cure). The DC in different times (3, 6, 9, 12 and 15 min), water sorption (Ws) and solubility (Sl), 3-point flexural strength (sf), elastic modulus (E), Knoop microhardness (H) and viability of NIH/3T3 fibroblasts were performed to characterize the resin cement.

Results. Reinforced self-adhesive resin cement, regardless of concentration, increased the DC for the self- and dual-curing modes at all times studied. The concentration of the TiO2-nt and the curing mode did not influence the Ws and Sl. Regarding sf, concentrations of both 0.3 and 0.9 wt% for self-curing mode resulted in data similar to that of dual-curing unreinforced cement. The E increased with the addition of 0.9 wt% for self-cure mode and H increased with 0.6 and 0.9 wt% for both curing modes. Cytotoxicity assays revealed that reinforced cements were biocompatible.

Significance. TiO2-nt reinforced self-adhesive resin cement are promising materials for use in indirect dental restorations. Taken together, self-adhesive resin cement reinforced with TiO2-nt exhibited physicochemical and mechanical properties superior to those of unreinforced cements, without compromising their cellular viability.

Author(s): Ramos-Tonello, CM (Ramos-Tonello, Carla M.); Lisboa, PN (Lisboa-Filho, Paulo N.); Arruda, LB (Arruda, Larisa B.); Tokuhara, CK (Tokuhara, Cintia K.); Oliveira, RC (Oliveira, Rodrigo C.); Furuse, AY (Furuse, Adilson Y.); Rubo, JH (Rubo, Jose H.); Borges, AFS (Borges, Ana Flavia S.)

DENTAL MATERIALS

Volume: 33 | Ed: 7 | Pages: 866-875 | Published: JUL 2017

PDF: Titanium dioxide nanotubes addition to self-adhesive resin cement: Effect on physical and biological properties

DOI: 10.1016/j.dental.2017.04.022

Sobre CDMF 591 Artigos
O CDMF é um dos Centros de Pesquisa, Inovação e Difusão (CEPID) apoiados pela FAPESP. O Centro também recebe investimento do CNPq, a partir do Instituto Nacional de Ciência e Tecnologia dos Materiais em Nanotecnologia (INCTMN).